產品優勢

  1. 減少停機時間、提高生產效率

  2. 提高兆歐姆讀數

  3. 提高極化指數

  4. 改善熱耗散

  5. 非導電性、非研磨性(不損壞設備、器具)

  6. 杜絕使用化學藥劑/溶劑/水(環保零污染)

  7. 現場就地清洗(無需拆解機器)

  8. 無二手廢料產生

應用層面

  1. 壓縮機和發電機

  2. 電動馬達

  3. 渦輪機

  4. 旋翼/定子

  5. 變電站絕緣材料和軸套

  6. 開關變電設備

  7. 變壓器

  8. 絕緣體

  9. 電子切換儀板

  10. 電纜途徑和塔板

  11. 場幀、半幀​

​ELectrical & Power generation

清洗各式各樣帶電電器如渦輪機、發電機、交流/直流電動機、變壓器等,通常都使用溶劑、化學藥劑、水刀和抹布做清潔維護。然而,運行設備的清潔維護,常常會導致生產效率下降,並造成閃絡現象及潛在中斷的危險。

PolarTech乾冰清洗技術提供了使用非導電的、非研磨性且快速的清潔的服務與維護,運行中的設備可以及時就地在現場直接清潔,不需拆卸或冷卻機器,而且不會對電纜或絕緣體受到損害。使用PolarTech乾冰清洗技術,在需要中斷做清潔及維護的機器設備部分,可以減少高達60%以上的時間,減少您的損失。


對小型電動馬達發電站採用乾冰清洗是簡單、安全有效的方式。而油脂、碳和灰塵會造成低兆歐姆讀數的設備故障,建議採用對環保零汙染的乾冰清洗方式將汙染物迅速清除,不傷害機器設備,時間成本的減少,相對投資回收期短且投資報酬率高。















​Cleaning of various energized electric apparatus like turbines, generators, AC/DC motors, transformers etc. is normally cleaned and maintained by using solvents, chemicals, water, and rags. The demand to keep the equipment running can often lead to deferred cleaning and maintenance resulting in reduced efficiency, and potential outages caused by flashover.

PolarTech dry ice cleaning technology provides service and maintenance dept. with a non-conductive, non-abrasive, fast cleaning operation of equipment in-situ without dismantling or cool-down. There is no damage to cables or insulation. Using PolarTech dry ice blasting, outage time, needed for cleaning/maintenance, have been reduced by up to 60 %. From small electric motors to power stations using dry ice blasting is the simplest, safest, effective and cleanest way of cleaning. Grease, carbon and dirt contribute to low meg readings as well as equipment failure. These contaminants are quickly removed and restored .

efficiency in an environmentally friendly way. Using PolarTech technology is extremely effective and very gentle to your equipment. The reduction in overall cleaning time has resulted in a short payback time on your ROI.
 
  

 
 

 
 
 
 
  
 
 

 
 

DRY ICE BLASTING

CLEANING TECHNOLOGY 

OF the FUTURE